1/4" Epoxy Floor Flakes for a Professional Finish
Create a more finished-looking floor with POURLA 1/4-inch decorative flakes. Broadcast them into a wet, compatible base coat to add color, texture and visual depth—then lock the system in with a compatible clear top coat.
Turn a plain coated floor into a finished space.
Decorative flakes break up large areas of solid color, create a more professional visual pattern and make repaired or naturally varied concrete less noticeable after the coating system is complete.
Decorative Color & Texture
Adds a layered, multidimensional appearance that looks more complete than a plain single-color coating.
Helps Disguise Variations
Visually blends repaired patch marks, discoloration and minor appearance differences in properly prepared concrete.
Adds Surface Profile
Creates texture beneath the clear top coat and may improve traction compared with a completely smooth epoxy finish.
Multiple Color Blends
Choose a blend that complements a garage, workshop, showroom, basement or surrounding interior.
What flakes can do
They add visual coverage, color distribution and texture to a properly installed floor coating system.
What flakes cannot do
They do not repair cracks or structurally damaged concrete. Repair and prepare the slab before applying the coating system.
Choose your broadcast density.
The same 20 lb box can cover very different areas depending on how much base-coat color you want to leave visible.
Light Sprinkle
Up to 400 sq. ft.A lighter decorative effect with more of the pigmented base coat visible.
Medium Broadcast
Approx. 200–250 sq. ft.Balanced flake distribution while allowing some base-coat color to remain visible.
Full Broadcast to Rejection
Approx. 100–150 sq. ft.A dense layer that covers the wet base coat for a uniform, professional flake-floor appearance.
Actual coverage varies with broadcast technique, desired appearance, floor layout, base-coat condition and normal application waste.
Quick Box Estimator
Use this planning tool to estimate how many 20 lb boxes may be required.
Estimated quantity
Medium broadcast · approximately 200–250 sq. ft. per box
What does “full broadcast to rejection” mean?
Apply flakes until the wet base coat cannot hold additional material and the base color is no longer visible. After the base coat cures, scrape in multiple directions and vacuum away every loose flake before applying the clear top coat.
Designed for multiple floor coating systems.
Broadcast POURLA flakes into a wet compatible base coat, then seal the finished broadcast with a chemically compatible clear top coat.
Compatible base-coat families
Always confirm that the primer, base coat and clear top coat are chemically compatible and that each layer is applied inside its required recoat window.
Built for residential and commercial working floors.
Use decorative flakes wherever a durable coating system also needs a cleaner, more visually consistent finish.
How to apply epoxy floor flakes.
A professional-looking broadcast depends on surface preparation, wet-edge control and even flake distribution.
Prepare the Concrete
Mechanically grind or profile the slab as required. Repair cracks and damaged areas, then remove all dust and debris.
Apply a Compatible Primer
Prime porous concrete to improve adhesion, help seal the slab and reduce outgassing in the coating system.
Apply the Base Coat
Roll out a compatible pigmented coating. Work in manageable sections so the surface remains wet during broadcasting.
Broadcast the Flakes
Throw flakes upward and let them fall naturally. Avoid throwing straight down, which can create concentrated clumps.
Allow the Base Coat to Cure
Follow the base-coat manufacturer’s specified cure time and recoat instructions before scraping or top coating.
Scrape and Vacuum
Scrape in multiple directions to remove standing edges, then vacuum thoroughly until no loose flakes remain.
Apply a Clear Top Coat
Seal the broadcast with a compatible clear epoxy or polyaspartic top coat to protect the flakes and create the final cleanable surface.
Clear information for accurate project planning.
- Material
- Premium vinyl paint chips
- Flake Size
- Approximately 1/4 inch
- Package Weight
- 20 lb box
- Application
- Broadcast into a wet base coat
- Light Coverage
- Up to 400 sq. ft.
- Medium Coverage
- Approx. 200–250 sq. ft.
- Full Broadcast
- Approx. 100–150 sq. ft.
- Compatible Systems
- Epoxy, polyaspartic, polyurethane and polyurea
Primer. Base coat. Flakes. Clear top coat.
Each layer has a specific job. Use compatible products and follow every manufacturer’s preparation, mixing, cure and recoat instructions.
Epoxy Primer
Helps seal prepared concrete and creates a dependable foundation for the layers above.
Shop POURLA PrimerPigmented Base Coat
Provides the background color and the wet layer that receives and holds the decorative flakes.
Decorative Floor Flakes
Add color, visual coverage and texture according to your selected broadcast density.
Clear Top Coat
Locks the flakes into the system and creates the final glossy, durable and cleanable surface.
Plan your flake floor with confidence.
Build a floor that looks professionally finished.
POURLA 1/4-inch Epoxy Floor Flakes make it easier to add color, texture and visual consistency to residential and commercial floor coating systems.

Reviews
Clear filtersThere are no reviews yet.