Ceramic Nano Coating for Wood & Epoxy River Tables
POURLA Ceramic Nano Coating creates a thin, clear protective layer over finished wood and fully cured epoxy surfaces. It helps enhance gloss and visual depth while repelling water, resisting stains and reducing light scratches and scuffs from everyday use.
One simple finishing step. Multiple everyday benefits.
Designed for finished furniture, epoxy river tables and custom wood-and-resin projects where appearance, cleanability and day-to-day protection matter.
Water & Stain Repellent
Liquids bead on the coated surface, helping make everyday spills easier to wipe away and reducing water-ring and moisture-related marks.
Light Scratch & Scuff Resistance
Creates an invisible surface layer that helps reduce light scratches, scuffs and normal day-to-day wear.
High-Gloss Enhancement
Adds visual depth and brilliance to finished wood grain while improving the clarity and shine of fully cured epoxy resin.
Easier Cleaning
The smooth, water-repellent surface helps reduce the effort needed for routine wiping and everyday maintenance.
Made for finished wood and fully cured epoxy
Use on clean, stable, non-porous or properly finished surfaces where the coating can spread evenly.
Bring out the wood. Reveal the epoxy.
A river table is built to show contrast, depth and detail. Daily use can gradually leave the surface looking dull, marked or harder to keep clean. POURLA adds a thin, clear finishing layer that helps maintain the visual impact of the finished surface.
Designed to enhance what is already there
The coating does not replace proper finishing or repair damaged surfaces. Instead, it adds a transparent, easy-to-maintain layer over a properly finished surface.
Refresh old. Protect new.
Refresh gloss and improve the appearance of finished wood or cured epoxy that has developed a dull, tired look from normal use.
Add an extra sacrificial surface layer before a new project is exposed to regular wiping, spills and everyday contact.
Give handmade pieces a polished final appearance while making the finished surface easier to care for.
How to apply POURLA Ceramic Nano Coating
Thin, even application matters more than using a large amount of product.
Clean the Surface
Remove dust, oil, wax, fingerprints and polishing residue. Make sure the surface is completely dry before application.
Test a Small Area
Apply the coating to an inconspicuous section first to confirm compatibility, gloss level and the desired appearance.
Apply a Thin Layer
Place a small amount on an applicator pad or soft cloth and spread it in a thin, even layer. Avoid using excess product.
Wait Approximately 60 Seconds
Allow the coating to settle and begin bonding across the surface.
Buff Evenly
Use a clean microfiber towel to remove excess product and polish the surface until the finish looks smooth and uniform.
Allow to Cure
Keep the surface dry and avoid regular use during the curing period specified in the product instructions.
Tips for Better Results
- Apply only to clean and completely dry surfaces.
- Use less product rather than creating a heavy layer.
- Work in manageable sections for more even coverage.
- Use clean applicator pads and clean microfiber towels.
- Do not apply over oil, wax, silicone or uncured epoxy.
- Avoid moisture during curing.
- Buff thoroughly to reduce haze or streaking.
- Test compatibility before treating the entire surface.
Frequently Asked Questions
Clear answers to the questions customers usually ask before application.
Clear protection for the surfaces you create.
POURLA Ceramic Nano Coating helps finished wood and fully cured epoxy surfaces stay glossy, water repellent and easier to maintaināwithout hiding the grain, depth or character underneath.

Reviews
Clear filtersThere are no reviews yet.