Countertop Epoxy Resin
SPECIFICATIONS
Technical Specifications
- Color: Epoxy Resin(Light blue liquid) Epoxy Hardener(Light blue transparent)
- Density: Epoxy Resin(66.2 ± 3.1 lb/ft³ @ 77°F) Epoxy Hardener(59.3 ± 1.5 lb/ft³ @ 77°F)
- Resin Viscosity: 2150 ± 300 cP @ 77°F
- Hardener Viscosity: 150 cP @ 77°F
- Mix Ratio by Volume: 2A:1B (2 part resin to 1 part hardener)
- Coverage: 8.3–10.3 oz/ft²
- Recommended Working Temperature:65–75°F
- Working Time: 25 ± 5 minutes at 25°C (77°F)
- Initial Cure Time: 24 hours @77°F
- Full Cure Time:48-72 hours @77°F
Work Environment
- Keep the adhesive containers clean. Mix components A and B strictly according to the specified ratio. Accurately measure the components, stir thoroughly along the inner wall of the container in a clockwise direction until evenly mixed, and let the mixture sit for 3-5 minutes before use.
Precautions
- Adjust the amount of adhesive mixed according to the operational time and required usage to avoid waste. When the temperature is below 60°F, preheat component A to 86°F before mixing to ensure easier handling (as component A thickens in lower temperatures). After use, seal the container lid tightly to prevent moisture absorption, which could render the product unusable. When the relative humidity exceeds 85%, the cured material surface may absorb moisture from the air, forming a white fog-like layer.
Testing Data
The typical data was measured in a laboratory environment with a temperature of 77°F and a humidity of 70%.
- Hardness: Shore D 80-84
- Heat Distortion Temperature:158°F (70°C)
- Water Absorption Rate: <0.1%
Reviews
Clear filtersThere are no reviews yet.